Application of novel extractants for actinide(III)/ lanthanide(III) separation in hollow-fibre modules

Separation tests using hollow-fibre modules were performed for the difficult selective extraction of trivalent actinides over fission lanthanides from acidic media. This article shows that with 2,6-di(5,6-dipropyl-1,2,4-triazin-3-yl)pyridine as the extractant, up to 94% americium could be extracted from 1.0 kmol/m³ HNO₃, with minimal lanthanide co-extraction. Using a synergistic mixture of bis(chlorophenyl)dithiophosphinic acid and tri-n-octyl phosphine oxide, tests were performed on extraction, lanthanide scrubbing and stripping. In the extraction test, up to 99.99% americium could be extracted from 0.5 kmol/m³ HNO₃, with approximately one third of the lanthanides being co-extracted. Mass transfer calculations using a consistent set of input data showed good agreement with the experiments.     

Experience With Nocturnal Hemodialysis

In order to provide a highly efficient, long-duration form of hemodialysis, we developed nocturnal hemodialysis. Patients were dialyzed nightly at home for 8 – 10 hours, 6 – 7 nights/week. We kept the dialysate flow at 100 mL/min and the blood flow at 250 – 300 mL/min. Patients were monitored remotely from the hospital through a computer connection. An internal jugular line was used as an access. We have trained 12 patients over 30 months and have accumulated 160 patient-months worth of data. The patients tolerated the dialysis very well and slept through the night. There was a significant improvement in their sense of well-being. Nightly Kt/V was 0.99. Weekly removal of phosphate was two times as high and β ₂ -microglobulin four times as high as conventional hemodialysis. All patients have discontinued their phosphate binders and have increased their dietary phosphate and protein intake. Hypertension was controlled with fewer medications, and erythropoietin dosages decreased. Complications were infrequent and included catheter occlusion and infections. Reusing the dialyzers decreased the cost of the treatment to levels similar to continuous ambulatory peritoneal dialysis. Nocturnal hemodialysis represents a viable dialysis modality that combines high quality, low cost, and excellent tolerance.     

Head and eye movements in unrestrained pigeons (Columba livia).

Head and eye movements were simultaneously recorded during locomotory and pecking behavior of 4 pigeons, which were trained to traverse a conditioning chamber, with a pecking key and a food dispenser at each end. Each trial involved key pecking, walking, and feeding. Head movements were registered with a skull-mounted miniature accelerometer, and eye movements were recorded with implanted electrooculogram (EOG) electrodes. An almost perfect temporal coordination between head and eye movements was observed during both walking and feeding bouts. During walking, head movements primarily provide retinal image stability, and eye movements support visual scanning. During feeding, head movements mainly subserve the grasping of food items, and eye movements maintain visual fixation on them. Because the eyes are reflexively closed during the middle phase of pecks, the head and eye movements are then under ballistic control. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A three-phase model for mixed columnar-equiaxed solidification

A three-phase model for mixed columnar-equiaxed solidification is presented in this article. The three phases are the parent melt as the primary phase, as well as the solidifying columnar dendrites and globular equiaxed grains as two different secondary phases. With an Eulerian approach, the three phases are considered as spatially coupled and interpenetrating continua. The conservation equations of mass, momentum, species, and enthalpy are solved for all three phases. An additional conservation equation for the number density of the equiaxed grains is defined and solved. Nucleation of the equiaxed grains, diffusion-controlled growth of both columnar and equiaxed phases, interphase exchanges, and interactions such as mass transfer during solidification, drag force, solute partitioning at the liquid/solid interface, and release of latent heat are taken into account. Binary steel ingots (Fe-0.34 wt pct C) with two-dimensional (2-D) axis symmetrical and three-dimensional (3-D) geometries as a benchmark were simulated. It is demonstrated that the model can be used to simulate the mixed columnar-equiaxed solidification, including melt convection and grain sedimentation, macrosegregation, columnar-to-equiaxed-transition (CET), and macrostructure distribution. The model was evaluated by comparing it to classical analytical models based on limited one-dimensional (1-D) cases. Satisfactory results were obtained. It is also shown that in order to apply this model for industrial castings, further improvements are still necessary concerning some details.     

Organic matter and nitrogen removal by an on site sewage treatment and disposal system

The performance of an on site sewage treatment and disposal system consisting of a septic tank, a gravel filter, a sand filter and soil absorption trenches operated alternatively, was studied in relation to organic matter and nitrogen removal efficiency. The system was simulated with the aid of a laboratory scale model. BOD₅ and SS removal efficiencies averaged 92.9 and 93.4% respectively. Substantial removal of nitrogen (up to 70%) was achieved due to nitrification followed by denitrification. Removal efficiencies were found to depend on the compaction characteristics of the filter media and the soil, the hydraulic loading applied and the flow conditions (saturated/unsaturated). The results indicate that the system under consideration is a feasible alternative for on site treatment and disposal of domestic sewage.     

Workplane illuminance prediction method for daylighting control systems

A new prediction method with an interior light sensor for the workplane illuminance in daylighting control systems is introduced. Based on radiosity theory, the spatial distributions of daylight and electric light in the space are discussed and the prediction method is developed. An experimental verification of the technique is performed in an outdoor test-room for a double-glazed window system with a motorized venetian blind integrated between the two glazings. Electric light and daylight predictions were performed in accordance with the proposed method. The results showed that the electric light workplane illuminance can be predicted with high accuracy (±5 lux error with a linear correlation) and that the daylight workplane illuminance can be predicted within ±20 lux (with a linear correlation) for any sky conditions (overcast, clear sky, or variable) with the window system controlled to prevent direct daylight transmission. This method is useful for integrated control of motorized daylighting devices and dimmable electric lights.     

A note on the satisfaction of the boundary conditions for Chebyshev collocation methods in rectangular domains

The way boundary conditions are imposed when applying Chebyshev collocation methods to Poisson and biharmonic-type problems in rectangular domains is investigated. It is shown that careful selection of the number of collocation points leads to a linear system ofn linearly independent equations inn unknowns.     

Semantische Informationsextraktion in medizinischen Informationssystemen

Zusammenfassung Dieser Artikel beschreibt einige Erfahrungen und typische Problemstellungen mit Textmining in der Medizin und gibt einen Einblick in aktuelle und zukünftige Herausforderungen in Forschung & Entwicklung. Interessant ist n?mlich, dass auch im ,,Multimedia-Zeitalter“ die meiste Information immer noch als ,,Text“ vorliegt. Mithilfe von statistischen und linguistischen Verfahren wird mit sogenannter ,,Textmining-Software“ versucht, aus Freitexten Information ,,heraus zu schürfen“ (deshalb ,,Textmining“). Allerdings ist es damit noch nicht genug. Der n?chste Schritt besteht darin, die Information sowohl nutzbar als auch brauchbar zu machen. Die jeweiligen End-Benutzerinnen und End-Benutzer müssen in die Lage versetzt werden, auf der Basis der gewonnenen Information deren Wissen zu erweitern. In unserem konkreten Fall sollen damit Entscheidungen im Rahmen ?rztlichen Handelns unterstützt werden. Probleml?sungen in diesem Bereich erfordern eine holistische Sicht- und Herangehensweise. Daher wird es immer wichtiger, Erkenntnisse aus Informatik und Psychologie zusammenflie?en zu lassen und auf systemischer Ebene technologisch umzusetzen.